BJYDY - SYNTHETIC RESIN THINNER
- MSDS: BJYDY
- Manufacturer: POTTER PAINT CO INC
- Product Name: SYNTHETIC RESIN THINNER
- National Stock Number: 8010-00-160-5794
Product Identification
Product ID:SYNTHETIC RESIN THINNER
MSDS Date:11/27/1984
FSC:8010
NIIN:00-160-5794
MSDS Number: BJYDY
Responsible Party
CORTLAND, NY 13045
US
Emergency Phone: 607-749-4937 OR 607-749-4706
Info Phone: 607-735-6754
Cage: 18329
Contractor
Telephone: 607-753-7654
Cage: 18329
Ingredients
ISOBUTYL ISOBUTYRATE (VP 3.2)
CAS: 97-85-8
RTECS: NQ5250000
Fraction By Weight: 10.5%
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 20.5%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 15.5%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
SPECIAL NAPHTHOLITE 66/3 (VP 12
Fraction By Weight: 53.5%
ACGIH TLV: 400 PPM
Hazards
Health Hazards Acute and Chronic:LIQUID IS IRRITATING TO THE SKIN,
CAUSING DERMATITIS.
Effects of Overexposure:HEADACHE, NAUSEA, LOSS OF COORDINATION. VAPOR
IRRITATES EYES, NOSE AND THROAT. LIQUID MAY CAUSE EYE INJURY.
First Aid
First Aid:REMOVE TO FRESH AIR, REMOVED SATURATED CLOTHING, FLUSH EYES
COPIOUSLY WITH WATER. REFER TO DOCTOR.
Fire Fighting
Flash Point Method:TCC
Flash Point:55F/13C
Lower Limits:1.4
Extinguishing Media:CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:AVOID HOT SURFACES,SPARKS FROM ELECTRIC
WIRING & BUILDUP OF STATIC ELECTRICITY.CLOSED DRUMS MAY EXPAND ON
HEATING.COOL WITH WATER & REMOVED TO SAFETY.
Accidental Release
Spill Release Procedures:HOSE OFF WITH WATER AND DETERGENT AS FOR OIL.
IMPORTANT: AVOID SPARKS, HOT SURFACES, ELECTRIC MOTORS, GASOLINE
ENGINES. VENTILATE WELL.
Handling
Handling and Storage Precautions:AVOID HIGH TEMPERATURE AREAS. AVOID
FIRES, SPARKS OR OPEN FLAME.
Other Precautions:GROUND CONTAINERS WHEN POURING. FREE FALL OF LIQUID
TO BE MINIMIZED TO AVOID STATIC CHARGES. DO NOT TAKE INTERNALLY.
AVOID PROLONGED CONTACT WITH SKIN, ETC.
Exposure Controls
Respiratory Protection:IF PROPER VENTILATION IS NOT PROVIDED, WEAR
SELF-CONTAINED BREATHING APPARATUS.
Ventilation:MECHANICAL VENTILATION SUFFICIENT TO KEEP THE AIR
CONTAMINANT CONCENTRATION.
Protective Gloves:YES
Eye Protection:SAFETY EYEWEAR INCLUDING SPLASH GUARDS.
Other Protective Equipment:COVERALLS
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:231 TO 300F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID HIGH TEMPERATURES OR HEAT
Hazardous Decomposition Products:MAY DISSOLVE SOME PLASTIC OR RUBBERS,
EMITS TOXIC FUMES ON HEATING, MAY REACT WITH OXIDIZING MATERIALS.
Disposal
Waste Disposal Methods:BEST BY CONTROLLED INCINERATION ACCORDING TO
STATE, LOCAL, ETC. REGULATIONS. SANITARY LANDFILL, DO NOT
INCINERATE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.